Input variables
The MC_SEW_EncoderAxis function block makes the following input variables available:
Variable name | Description |
|---|---|
EncoderAxis | Data type: AXIS_REF |
Reference to a logical device of the type "LogicalDevice encoder axis" (name of the logical device) | |
xEnable | Data type: BOOL |
| |
PointerToPosition | Data type: POINTER TO DWORD |
Address of the position of the external encoder, e.g. ADR(%ID12). INFORMATION: This input variable is only required if "External source" is selected as the encoder source in the configuration. | |
PointerToVelocity | Data type: POINTER TO DWORD |
Address of the speed in [min-1] of the external encoder, e.g. ADR(%ID16). INFORMATION: This input variable is only required if "External source" is selected as the encoder source in the configuration and a speed information of the encoder is available. If a speed information is available from the external encoder, this can optionally be used with this input variable. This speed value is more precise than the speed determined internally through derivation of the position. | |
Encoder2 | Data type: IGetDeviceHandler |
Reference to a logical device of the type MOVI-C® axis (name of the logical device) to which the encoder is connected. INFORMATION: This input variable is only required if "Encoder2" is selected as the encoder source in the configuration. |